Hi! Simply click below and type your query.
Our experts will reply you very soon.
Shri Krishna Ribbon Blender is a horizontal shaft ribbon type mixer for different types of powders. The machine works on the principle of fine blending or mixing of materials by the impact of anti-directional ribbons.
The materials to be thoroughly mixed are put inside the blender through the opening present on the top portion. This unit comprises of two types of ribbons. The outer ribbon moves the materials in one direction while the inner ribbon moves the material in the opposite direction. These ribbons move at high speed in sideways and circular direction. This ensures mixing of the materials in a very short amount of time. The materials move from the center to the sides of the ‘U’ tank and from the sides to the center thereby ensuring homogeneous mixing. Once the materials are thoroughly mixed, the final product is discharged either through central opening or from the side bottom opening.
This unit is used in cases where small amount of chemical is required to be thoroughly mixed with large volume of powdered material.
The discharge height is adjusted in a way that material handling time is nil and discharge the operation is dust free.
Shri Krishna Ribbon Blender is the perfect machinery fit for fine powder mixing of spices, cocoa, seasonings, Dyes and pigments, cattle and poultry feed, Insecticides and Pesticides, Chemical Industry, Pharmaceutical Industry and many more.
Shri Krishna Ribbon Blender is made from best quality raw materials at our site. The main body of the blender is fabricated from thick M.S. plates and is electrically welded. The unit is provided with one main overflow spout on the side and one discharge outlet on the bottom. The body is fitted with a horizontal shaft having M.S. spiders over which the ribbons are fitted on both sides. The shaft revolves on self-aligning bearings. The driving is provided through the spur gear arrangement. The speed reduction is provided in two stages firstly from the motor to counter shaft by ‘V’ belt pulleys and the other from counter shaft to blender by spur gear. The body is mounted on angle iron frame. The main shaft runs on Heavy Duty Ball or Roller Bearings.
Less time consuming
Easy to handle
Adequate discharge clearance provided
Low Power Consumption
Functioning stops as soon as the cover is opened ensuring safety
Dust Free Operation